Commercial UV Sterilizers

TrojanUVMax G/H/J

Unique sizing system

    Allows you to select the unit based on flow rate, UV transmittance, and the UV dose required.                                                                                                       Model G treats up to 19 US gpm/72 lpm(30 mJ/cm 2 at 85% UV transmittance) Model H treats 20 to 39 US gpm/76 to 148 Ipm(30 mJ/cm 2 at 85% UV transmittance)  Model J treats 40 to 45 US gpm/151 to 220 Ipm (30mJ/cm 2 at 85% UV transmittance).               

Intutitive User Interface

    Plug and play connections make installation as easy as "connect the dots". Audio alarms notify you of any problems with the operation of the unit. Visual alarm indicators show you exactly which component has caused an alarm, which makes for easy troubleshooting                                                                          Revolutionary Lamp Design
    Provides a constant UV dose in a range of water temperatures
    This gives you the flexibility to install in a variety of site conditions, all the way from hot recirculation lines to ice-cold water.     Lasts an unprecedented two years, reducing maintenance requirements (Most UV lamps last one year). Lamp and sleeve remove easily from the reactor chamber ensuring you are aware of any build up of minerals on the sleeve that may interfere with the proper UV dose being delivered to the water

Optional Diagnostic UV Intensity Monitor

Assures sufficient UV light is delivered to your water at all times .

Ability to self-test. This confirms that the sensor is operating properly

Easy Installation Features

An integrated ground installs like a standard plug - no more grounding wires!

Combo ports give you the flexibility to connect to either 1-1/4" NPT or 1" FNPT

A plug and play solenoid is an optional feature that is equipped with a manual override to make shocking the water lines easy 

Electronic Power Supply (230V 50Hz)

More energy efficient

Withstands fluctuations in voltage that can cause low UV output and damage to the lamp

 

TrojanUVMax ProSeries Pro20/Pro30

    Twice the Power - A revolutionary lamp with twice the output of current high-output lamps, giving you compact single-lamp systems that are half the size of their predecessors

    Intuitive Interface - Because a picture is worth a thousand words

    Simple Connections - With plug-and-play colour coded connections, it's as easy as "connect the dots."

    Twice the Life Expectancy - Our revolutionary new lamps last an unprecedented two years, reducing maintenance requirements.

    Cooler Water - The CoolTouch significantly reduces water temperature and does not waste and water.

    Simply Shocking - The plug-and-play solenoid is equipped with a manual override to make shocking the water line easy. Easy Quarter-Twist Assembly - A quarter-twist to the positive stop and you're done. No tools, no risk of overtightening. Integrated Ground - Like a standard plug - no more grounding wires!

    Integrated Flow Restrictor - Assembly is simplified by the use of an integral flow restrictor.

    Combo Parts - Flexibility to connect to either 1-1/4" NPT or 1" FNPT.

    Test of Sensor Operation - With the push of a button you can confirm the proper operation of the sensor.

    Systems tested and certified by NSF international against NSF/ANSI Standard 55 for disinfection performance Class A.

 

 

 

Please Contact Us to purchase any of these items or for a quote on any specialized application you may require.